- Created by Karolin Hemmingsson, last modified by Ann Base on Sep 13, 2021
This article describes which encoders are supported by Nexus Card SDK. The following encoders are supported: Connection type U: USB MIMIU-S MSM 100-S V3.x MSM 100-S V4.0 SC-2560 SC-2560 SM-4500 (for CTC-Chip, LEGIC OS-2000 V7.1 or higher is required) MIM256, MIM1024 ATC128-MV210, ATC256-MV210 ATC1024-MV110, ATC512-MP110 ATC2048-MP110,ATC4096-MP310 ATC4096-MP311 AFS4096-JP10 CTC4096-MP410 (only segmented media) Connection type U: USB OMNIKEY CardMan 5121 Is a dual interface reader: RFID & Smartcard OMNIKEY CardMan 5321/5421 Is a dual interface reader: RFID & Smartcard OMNIKEY CardMan 5121 Is a dual interface reader: RFID & Smartcard OMNIKEY CardMan 5321/5421 Is a dual interface reader: RFID & Smartcard Connection type U: USB HITAG 1,2 HITAG 1,2,S Connection type U: USB Connection type U: USB Connection type U: USB EM4001, EM4002, EM4022, EM4102, EM4200, Unique, Q5,e5555 Reading the serial number of the transponder chip. Must be flashed with a PC/SC compatible firmware. Connection type U: USB Connection type U: USB ST14 C 02 (256 bytes) GFM 2K (256 bytes) SLE 4418 SLE 4428 Connection type U: USB LEGIC (13.56 MHz)
Encoding methods Supported encoders Credentials / Chips, Remarks Device Installation module or Component
S: SerialLEGIC prime
variousS MIM256, MIM1024 (segmented and unsegmented) LEGIC advant LEGIC CTC various S MIFARE (13,56 MHz)
Encoding methods Supported encoders Credentials / Chips, Remarks Device Installation module or Component
S: SerialMIFARE Classic (1K, 4K) Philips MF RD560/ADA S only 1K media Elatec TWN4 MIFARE NFC-PI Elatec TWN4 MIFARE NFC-PI U Must be flashed with a PC/SC compatible firmware Gemplus GCR680 S only 1K media Gemalto GemEasy332 S Gemalto GemEasy-Access332 (new name: GemProx-P2) S Gemalto GemEasyLink332 (new name: GemProx-C2) S identical to GemEasyAccess332, but without the housing OMNIKEY CardMan 5121
BoardU OMNIKEY CardMan 5321/5421
BoardU OMNIKEY CardMan 5x22 OMNIKEY CardMan 5x22 U RFID MIFARE DESFire EV1/EV2 OMNIKEY CardMan 5121
BoardU OMNIKEY CardMan 5321/5421
BoardU OMNIKEY CardMan 5x22 OMNIKEY CardMan 5x22 U RFID OMNIKEY 5127CK-Mini OMNIKEY 5127CK-Mini U RFID Elatec TWN4 MIFARE NFC-PI Elatec TWN4 MIFARE NFC-PI U Must be flashed with a PC/SC compatible firmware MFP72, MFP80 MFP72/80 U Only for non-standard REINER SCT cyberJack® RFID basis U Only available as a desktop reader HITAG (125 kHz)
Encoding methods Supported encoders Credentials / Chips, Remarks Device Installation module or Component
S: SerialPhilips/Mikron HT RM440 S Feig OBID ID RW01 S This reader is only used to encode / read the ID number defined by Feig Feig OBID ID RW02 S This reader is only used to encode / read the ID number defined by Feig Frosch HT RM401 S Proxif (125 kHz)
Encoding methods Supported encoders Credentials / Chips, Remarks Device Installation module or Component
S: SerialProxif (HITAG 1) Philips/Mikron HAT RM440 S Interflex Proxif Encoder Interflex Proxif Board S HID
Encoding methods Supported encoders Credentials / Chips, Remarks Device Installation module or Component
S: SerialProx (125 kHz) ProxPro 5352A S Only for reading HID Prox cards RFIDeas pcProx Reader U For reading HID Prox cards and Indala Prox Elatec TWN4 MIFARE NFC-PI Elatec TWN4 MIFARE NFC-PI U Only for reading HID Prox cards. Must be flashed with a PC/SC compatible firmware. Elatec TWN4 MULTITECH 2 LF-P Elatec TWN4 MULTITECH 2 LF-P U Only for reading HID Prox cards. Must be flashed with a PC/SC compatible firmware. EM (125 kHz)
Encoding methods Supported encoders Credentials / Chips, Remarks Device Installation module or Component
S: SerialFEIG OBID ID RW 40.30-U FEIG OBID ID RW 40.30-U (Board) USB (Virtual COM Port) Reading the serial number of the transponder chip EM4102 Elatec TWN4 MIFARE NFC-PI Elatec TWN4 MIFARE NFC-PI U UHF (860-960 MHz)
Encoding methods Supported encoders Credentials / Chips, Remarks Device Installation module or Component
S: SerialUHF EPC Gen2 ThingMagic M5e ThingMagic M5e-C U 16/32/48/64/80/96 bits Only Class-1 tags (passive tags) Memory chip cards
Encoding methods Supported encoders Credentials / Chips, Remarks Device Installation module or Component
S: SerialCards with an asynchronous protocol (T=0, T=1);
with a synchronous protocol (2-wire protocol / 3-wire protocol,
I2C-Bus);OMNIKEY B1 CardMan 9010 S Magnetic stripe encoding
Encoding methods Supported encoders Credentials / Chips, Remarks Device Installation module or Component
S: SerialExternal Devices Magnetic stripe encoders (LoCo, HiCo)
built into printersAlmost all card printers that conform to ISO 7810 standards No separate device connection; control through printer interface
This article is valid for Card SDK version 5.9 and later.