This article describes how to get started with the Nexus CM Test clients that are provided with the installation and can be used to test the configurations for different protocols.
Prerequisites
The following prerequisites apply:
-
Protocol Gateway must be installed. See Install Protocol Gateway .
Test the installation with CM test clients
Start Nexus CM test clients
To start the test clients:
-
Extract the file Testclients.zip from \Nexus\cm\clients\web\ to \Nexus\testtools.
-
Start the test tools by typing the following in the command prompt:
Example: Start Nexus CM test tools
java –jar testtools.jar
Configure test clients per protocol
The test client for each protocol must be enabled, by setting start = true in the configuration file for that protocol. Depending on the protocol, some additional properties must also be set.
For more information, see Configuration examples in Protocol Gateway .