Skip to main content
Skip table of contents

Cards add-on External production - Start-up guide

This article describes the steps that have to be done with the Cards add-on External production package in Smart ID before you can start to use it.

The steps are done by the Administrator in Identity Manager Admin. There are several options included in the Cards add-on External production package. These options have default settings that can be changed. Read all about the options here: Cards add-on External production - Options. The other packages also have options.

Prerequisites
  1. Upload the Cards package in Identity Manager Admin. Follow all steps in Cards - Start-up guide.

Step-by-step instruction for the administrator

Upload the Cards add-on External production package

Upload the CardsAddonExtProd.zip package in the Identity Manager Admin:

  1. Log in to Identity Manager Admin with your administrator user. Default login credentials are username: admin, password: admin.

    It is recommended to change the password for the administrator user.

  2. In Identity Manager Admin, select the Configuration file tab.
  3. Click Upload configuration
  4. Click Select file and add the path to the CardsAddonExtProd.zip file.
  5. Click Upload.

For information about how to change default use case settings, see Cards add-on External production - Options.

Integrate Nexus GO Cards to Identity Manager

You need to set up the connection and configuration of the Nexus GO Cards layout in Smart ID Identity Manager.

  1. To configure the Nexus GO Cards layout, open this article: Integrate Nexus GO Cards to Identity Manager.
  2. In that article, do the following:
    1. Under heading "Prerequisites", make sure the conditions in the bullets are fulfilled.
    2. Under heading "Do settings in smartid.env and SYSTEM_PROPERTIES", do all steps.
    3. Under heading " Set up a Nexus GO Cards Layout in Identity Manager", do the following:
      1. Set permissions - NO
      2. Select unique name for Nexus GO Cards Layout - YES
      3. Configure Nexus GO Cards Layout - YES
    4. Under heading "Set up Nexus GO card template", you shall not add a new card template, but you shall edit the applicable card template. Do the following:
      1. In Identity Manager Admin, go to Home > Cards.
      2. Select the applicable card template and open it for editing.
      3. Do steps 4-5.
      4. Do step 7.
Enable Cards add-on External production use cases

See Cards add-on External production - use cases for the operator for information about how to enable the available use cases.

Set options for use cases

There are options that can be set for many of the use cases. These are described here: Cards add-on External production - Options.

  1. Set the options that need to be changed from the default values.

Additional information


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.