This article applies to Digital Access 6.4.0 and Smart ID Mobile App 5.5 and later versions.
This article describes how to set up NFC card authentication in Digital access together with the Smart ID mobile app.
Prerequisites
-
Log in to Digital Access Admin with an administrator account.
-
Deployed Digital Access, see Deploy Digital Access component
-
Only for Smart ID Mobile App: There is an SMS or email gateway available for sending notifications.
-
The access point must be protected by a public certificate, see Add certificates in Digital Access. When deploying a server certificate, its certificate chain up to the root shall also be added in CA certificates.
-
Smart ID Messaging must be installed on-premises or consumed as a service.
-
Smart ID Messaging must be connected to Digital Access, see Set up Personal Messaging in Hybrid Access Gateway.
Step-by-step instruction
Configuration in authentication method
Configuration in the Personal mobile authentication method:
-
Create a "Personal mobile" authentication method by following the steps mentioned in Set up Smart ID authentication.
-
In the authentication method, select Authentication using QR code. Enter the protocol - "com.nexusgroup.smartid.nfc" for NFC card authentication to work with the Smart ID Mobile App.
Additional information