Skip to main content
Skip table of contents

Install digital certificates on iOS

This article is valid from Personal Mobile 4.0.

This article describes how to install a digital certificate in the device keychain on iOS devices, using Smart ID Mobile App.

If you want to see the certificates that are installed on your mobile device, go to Settings > General > Profiles > Personal > More Details.

Step-by-step instruction

  1. Open Smart ID Mobile App.

  2. Accept the request to install the P12 certificate.

  3. Enter PIN or Touch ID for Smart ID Mobile App (or Face ID on later device models). 

  4. The certificate details are displayed, including the password. Click Install.

  5. The certificate password is copied to clipboard. It will be used in step 13. Click OK

  6. The certificate install request opens in Safari. Click Install Certificate

  7. Click Allow to open Settings on the device.

  8. Click Close.

  9. Click Profile Downloaded to review the profile before you install the certificate.

  10. Click Install

  11. Enter the device passcode. 

  12. Ignore the warning and click Install.

  13. Paste the certificate password (from step 5), and click Next.

  14. The certificate is installed. Click Done.

  15. Confirm if the certificate was successfully installed.

  16. Smart ID Mobile App is opened.

Additional information

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.